Medilogic plantar pressure measurement system

The plantar pressure measurement system developed by medilogic company of Germany can collect plantar pressure in real time through 64 pressure sensors on each foot pad, and transmit the signal to the computer for processing and analysis. It is widely used in biomechanics, sports training, rehabilitation medicine and ergonomics. As a supporting technology in the field of gait research, foot disease diagnosis and sneaker design, plantar pressure measurement has experienced the development of pedography, soleography, force plate, force platform, in shoeplantar. Based on the footprints or traces left by human feet on the deformable materials such as gypsum and rubber, footprinting technology makes a qualitative judgment on the pressure and distribution of the sole. Plantar pressure measurement is an important application technology in gait analysis, clinical foot disease diagnosis and treatment, sports shoes design and other fields, as well as a powerful tool for biomechanical research.

Detailed introduction

Technical parameters of medilogic plantar pressure measurement system

Plantar pressure measurement system

The foot pad dynamometer developed by medilogic company of Germany can collect foot pressure in real time through 64 pressure sensors on each foot pad, and transmit the signal to the computer for processing and analysis. It is widely used in biomechanics, sports training, rehabilitation medicine and ergonomics.

Characteristic:

1. Each one contains 64 FSR high-sensitivity pressure sensors, which can test the foot pressure changes under various sports conditions such as standing, walking, running, etc. Pressure range: 0.5 - 65 n / cm2 sampling frequency: 60Hz or 300Hz

2. It can transmit the sole pressure signal in real time and wirelessly, and control and analyze it by software.

3. Convenient recording, stop and playback functions.

4. It can display the pressure value, three-dimensional grid, color pressure spectrum, and compare the pressure on one side or left and right.

5. Cop of pressure center, maximum pressure and mean pressure can be calculated.

6. Data can be stored and converted to multiple formats

System configuration:

1. insole: 3-5 pairs

Each contains 64 FSR pressure sensors

Dimensions: 35 / 3637 / 38, 41 / 42, 43 / 44,

45 / 46 (also with floor mat)

2. Transmit modem:

Weight: 150g

Power supply: 9V standard battery

3. Computer receiving modem:

Weight: 110g

Port: RS232 serial port

Power supply: 9V standard battery

Wireless transmission:

Frequency: 433.92 MHz

Scope: more than 100m indoor, more than 20m indoor

Digital transmission rate: 38.4 KB / S

Frequency: 433.92 MHz

Scope: more than 100m indoor, more than 20m indoor

Digital transmission rate: 38.4 KB / S

4. Laptop configuration:

4 m 2.0 MHz, 256 MB ram,

30g hard disk, CD-RW recording

Cushion type pressure measuring system

The cushion type pressure measurement system developed by medilogic company of Germany can collect the pressure value in real time through the pressure sensor distributed on the cushion, and transmit the signal to the computer for processing and analysis wirelessly. It is widely used in plastic surgery, trauma, sports medicine, ergonomics and other fields.

Product features:

1. Soft force measuring pad and optional test system make it possible to collect the pressure of various seats or cushions (such as bicycle cushion and saddle pressure test)

2. Cushion area: 305mm x 200mm to 758mm x 808mm (optional according to actual needs)

3. Number of sensors: 240 to 480 (according to the size of cushion area)

4. Pressure range: 0.6 - 64 n / cm2

5. Sampling frequency: 60Hz

6. Wireless transmission of data: through T & T medilogic professional software and wireless transceiver, it can realize wireless transmission of pressure signal, and store and analyze the data.

7. Convenient recording, stop and playback functions

8. Data can be stored and converted to multiple formats

Platform plantar pressure measurement system

Principle: 4096 SSR sensors are distributed on the measuring area of 480 x 480 mm. The foot pressure of the foot is transmitted to the computer through the cable or the optional wireless network card for analysis.

System features:

1. Real time display: the analysis system under the windows interface can display the pressure distribution of the bipedal in real time and display it in figures or chromatograms.

2. Real time record: click the record icon of the program to conveniently store the data in the computer hard disk;

3. Real time analysis: the pressure line and center of gravity position of single group can also be displayed quickly. The static or one step pressure can be displayed in two or three dimensions.

Technical parameters:

Platform of dynamometer: 4096 SSR sensors

Measurement area: 480 x 480 mm

Overall area: 530 x 540 mm

Measurement range: 0,6 to 64 n / cm2

Sampling rate: 20 Hz (optional 50 Hz, video synchronization)

Data modem:

Weight: 180g

Length x width x height: 145mm x 60mm x 30mm

Power supply: 9V battery

Computer receiving modem (wireless transmission only)

Weight: 150g

L x W x H: 93mm x 75mm x 28mm

RS232 computer interface

Power supply: 9V battery

Transmission carrier frequency: 2,4 GHz

Transmission range: About 25m

inquiry

Name *

German medilogic plantar pressure measurement system