Pressure distribution measurement system your current position: Home > Product Center > biomechanics > pressure distribution measurement system

I-Scan palmtop pressure distribution measurement system

I-Scan palmtop pressure distribution measurement system

I-Scan handheld pressure distribution sensor is a low-cost and very portable pressure measurement system. The system consists of a pocket PC (PDA) executing I-Scan operation software, a sense connection interface and a sense scanner, as well as a set of pressure sensing tablets. Not only can you use our patented and ultra-thin sensor to measure the pressure load between two contact surfaces, but also can directly capture and observe the pressure data on Pocket PC (PDA).

Detailed introduction

I-Scan handheld pressure distribution sensor can be used in almost all kinds of environments to measure the pressure distribution between surfaces. Its application scope includes

– assist the equipment engineer to calibrate the instrument.

– assist the field service personnel to install the printing machine table and printing wheel

– assist medical staff to monitor patient department stress during (or after) surgery

– assist clinicians to adjust the pressure of burn protective clothing

– assist surgeons in balancing implant pressure distribution during surgery

– assist the vehicle assembly personnel to adjust the closing pressure of doors and windows

Because the file format of I-Scan laptop / desktop system and PDA system can be fully compatible, users can send the data back to the company for more data analysis when they finish capturing the pressure data on site. The additional functions of I-Scan, such as sensor calibration and pressure data analysis, can also be processed on the I-Scan computer system.

application

Test & Measurement

Comparison test

Reliability test

Conformity inspection

Instrument erection

Pinch roller, sealing jaw, gasket, soft seal

Screen printing, etc

Key features

pressure distribution

Snapshot record

Ability of drawing and analysis

Multiple snapshots, real-time observation

Multiple sensors available

High spatial resolution

Flexible film sensor

The sensing piece is durable and reusable

The sensing piece is durable and reusable

Pressure range 0-25000 psi (0-175mpa)

Erection is easy.

Easy to operate

8-bit pressure resolution

Professional engineer team support

Upgradeable to I-Scan system

Applicable units

Assembly line, R & D lab, mechanical packaging line, manufacturer

Applicable industries

Automotive, semiconductor, pharmaceutical, sporting goods, human engineering, packaging, paper, printing, regulatory agencies, university research units, and more

Software features

2-D, 3-D pressure distribution image observation

Snapshot pressure measurement

Real time mapping, analysis and storage of data (pressure, force, area)

Using "Focus boxes" and

"Lines" function, users can compare and analyze local sensing

Simultaneous observation curve comparison multiple weight measurement results

Single point correction of sensing film

Engineering unit selection

Introduction of sensing film

I-Scan Lite can be used with most of our sensors. Here is a summary of our sensor features

Sensing points

Standard 2288 (up to 146000)

Spatial density

Up to 16000 sensels / in (248sensels / cm2)

spatial resolution

0.025 x 0.025in – 0.7 x 0.7in

(0.64 x 0.64mm – 17 x 17mm)

Operating temperature

15°F-140°F(-9°C-60°C)

Pressure sensitive area

0.120.12in – 22.7 x 34.8in

(3.0 x 3.0mm – 578 x 884mm)

technology

Piezoresistive

Correcting

Use force control device to carry out field measurement and correction

Pressure range

0-25,000 psi (0-175MPa)

Sensing thickness

0.004 in (0.1mm)

Optional add ons

I-Scan Lite Enhanced –

An enhanced version of the operating software can provide additional functions, such as 2-D contour display, curve drawing and data analysis, and enhanced version of the correction function. At the same time, you can also choose to add a single or unlimited number of pressure snapshot function, which allows you to store a series of static pressure measurement results in a file, which can be easily compared with the pressure. Other data analysis functions such as peak pressure, weight and center of force are also included.

Upgrade to I-Scan – I-Scan Lite

The system can be completely upgraded to I-Scan system. Since the file formats between the two are completely compatible, the files before upgrading will not be affected after upgrading.

Equilibration/Calibration Devices –

A uniform pressure distribution is provided on the sensing surface by the air pressure device to standardize the output signal of each sensing point, and the system will compensate the difference of each sensing point in an electronic way.

Wireless capability – provides a wireless connection device for your sensor and computer, so that you can be more flexible in the operation of data acquisition.

inquiry

Name *

I-Scan palmtop pressure distribution measurement system

Contacts *

Please enter your name

Telephone *